PRODUCTS Home > Products > Crimping tool > NEW battery powered crimping tool
Battery Powered CrimpingTool
  • Crimping force 120KN
    Stroke 42mm
    Crimp/charge 120times(Cu 150mm2)
    Crimping cycle 6s-8s(depend on the size of cable)
    Capacity 3.0Ah
    Voltage 18V
    Charging time 2hours
    Package plastic box
    Crimping dies 16,25,35,50,70,95,120,150,185,240,300,400mm²
    Battery 2pcs
    Charger 1pcs
    Sealing ring of cylinder 1set
    Sealing ring of safety valve 1set
  •   Micro computer control system-automatically detect the pressure when it is crimping,with double safety protect.
      Pressure released automatically Function-the tool stop forcing the
    pressing and release 90% pressure when the pressure reached maximum.

      The tool equipped with a double piston which characterized by a fast approach towards the connecting material and transfer to high
    pressure automatically by slow crimping.
      The crimping head can be smoothly turned by 350°around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
      If a deviation from the set operation pressure or low btter charges is identifide,an acoustic signal sounds and a red display flashes. 
      One key control-press the trigger to start working,half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
      Li-ion batteries do neither have a memory effect nor self discharge.
    Evev after long periods of non operation the tool is always rady to operate.In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

      A Temperature sensor makes the tool stop working automatically when the tempreture over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work the tempreture reduced to the normal.