PRODUCTS Home > Products > Fitting Tools > Clamping Tool
Battery Powered clamping tool
ITEM NO: EZ-1240
    LED for battery charge, a red display flashes shows if a deviation is identified
    to reset slide, opening the drain valve for moving the tool back to starting position
    Crimping force 20KN
    Clamping range 12-40mm
    Stroke 40mm
    Connecting/charge 320 times
    Working cycle 3s-10s
    Voltage 18v
    Capacity 3.0Ah
    Charging time 2 hours
    Package steel case
    Dies 12-40mm2
    Battery 2pcs
    Charger 1pc
    Sealing ring of cylinder 1set
    Sealing ring of safety valve 1set
  •   Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
      The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
      The tool equipper with a double piston pump which characterized by a fast approach towards the connecting material and a slow working stroke.
      The crimping head can be smoothly turned by 360°around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
      If a deviation from the set operation pressure or low bttery charges is identified, an acoustic signal sounds and a red display flashes.
      All tools can be controlled by one trigger. This results in an easy handling and a better grip compared to a two button operation.
      Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ration with 50% more capacity and shorter charging cycles compare to NiMH batteries.
      A Temperature sensor makes the tool stop working automatically when the tempreture over 60℃ under long time working, the fault signa sounds, it means the tool can’t continue work until the tempreture reduced to the normal.