PRODUCTS Home > Products > Fitting Tools > Crimping Tool
Crimping tool
ITEM NO: EZ-1632
  • Patent No:ZL200820169104.5
    Patent No:ZL200820168541.5
    Patent No:ZL200830285922.7
    Crimping force 60KN
    Stroke 17mm
    Crimp/charge 320times(Cu 150mm2)
    Crimpng cycle 3s-6s(depend on the size of cable)
    Voltage 18v
    Capacity 3.0Ah
    Charging time 2hours
    Package steel case
    Crimping die for SV type Φ16mm.20mm.25mm
    Crimping die for H type Φ16mm.20mm.25mm.32mm
    Crimping die for TH type Φ16mm.20mm.26mm.32mm
  •   The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
      A manual retraction allows the user to return the piston into the starting positon in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
      The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion.
      The crimping head can be smoothly turned by 360°around th longitudinal axis in order to gain better access to tight corners and other difficult working areas.
      Lion batteries do neither have a memory effect nor self discharge. Even after long periods of non operarion the tool is always ready to operate. In addition we see a lower power weight ration with 50% more capacity and shorter charging cycles compare to NiMH batteries.
      A Temperature sensor makes the tool stop working automatically when the tempreture over 60℃ under long time working, the fault signa sounds, it means the tool can’t continue work until the tempreture reduced to the normal.